standard- & datasheets downloads |
---|
Doppelrückschlagventil 55.002.3 datasheet: N 020 007 | |
Elektroventil mit Träger 56.503.3 datasheet: N 007 008 | |
Absperrhahn 1" m.elektr.Kontakten 57.010.3 datasheet: N 022 021 | |
Production of brake components
The brake components are designed for brake
panels. The connection
between the components and the brake panels takes place with fastening
screws.
This
connection included the air connection and maybe the electrical
connection. The
brake components are produced in the following manufactured sizes:
Nominal
diameter 7 mm, 19 mm and 25 mm.
The brake components with a nominal diameter of
7 mm – DIN 5588, part 2
– can offer in the following constructions:
-
magnetic
valve with manual operation
- duplex non-return valve
- double non-return valve
- non-return valve
- push-button valve
- stop-cock
- stop-cock with lead sealing
- stop-cock with lock
- air filter
-
pressure
switch
The brake components with a nominal diameter of
19 mm – DIN 5588, part 1
– can offer in the following constructions:
-
magnetic
valve
- non-return valve
- double non-return valve
- air filter
- stop-cock
-
stop-cock
with special handle
-
stop-cock
with switch
reversing
lever
– spezial
design
-
stop-cock
with two sealings – special design
-
stop-cock
with lock
- three-way stop-cock
The brake components with a nominal diameter of
25 mm – DIN 5588, part 1
– can offer in the following constructions:
-
stop-cock
-
stop-cock
with electrical contacts
-
air
filter
Additional to this standardized brake
components we have a many other
parts designed for valve support, inquiry requested.